1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
Binance download Android-APP, download it now, new users will receive a novice gift pack.
1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
Binance app download Play Store
author: 2025-01-23 05:02133.34MB
Check161.16MB
Check634.76MB
Check569.27MB
Check757.91MB
Check795.51MB
Check371.44MB
Check876.46MB
Check293.34MB
Check782.15MB
Check777.67MB
Check927.39MB
Check689.88MB
Check945.79MB
Check313.22MB
Check968.27MB
Check844.82MB
Check432.11MB
Check322.24MB
Check191.68MB
Check253.48MB
Check551.19MB
Check651.66MB
Check758.99MB
Check457.93MB
Check594.69MB
Check451.27MB
Check169.18MB
Check236.48MB
Check641.39MB
Check397.58MB
Check342.28MB
Check333.34MB
Check637.92MB
Check797.62MB
Check992.97MB
CheckScan to install
Binance download Android to discover more
Netizen comments More
1079 各有所短网
2025-01-23 06:02 recommend
180 并日而食网
2025-01-23 05:41 recommend
193 成双成对网
2025-01-23 05:38 recommend
1910 犬兔俱毙网
2025-01-23 05:03 recommend
1797 死得其所网
2025-01-23 04:32 recommend